Today we carried out the survey for measuring the position of the NCal benches @NE: as for the previous survey, we measured the point on top of the calibrator and the points located at the sides of the benches.

After the first survey of the two benches (east and west side of the tower) the calibrators have been swapped each other and the survey repeated. The second position is labelled with the addition of _Swap.

Tab1 reports the result of the survey, while the scheme of the survey is shown in the figure NE_NCal_SurDiag.

Fig.1 to 5 report some pictures of the survey carried out and of the target points.