Yesterday, we carried out the survey for measuring the position of the NCal benches @WE: as for the previous survey, we measured the point on top of the calibrator, 2 for each bench and the points located at the sides of the benches (where possible)

After the first measure on the top, each calibrator has been turned by 180 degrees and the survey repeated. The second position is labelled with the addition of _Pos2.

Tab1_1 and Tab1_2 report the result of the survey, while the scheme of the survey is shown in the figure WE_NCal_SurDiag.

Fig.1 to 5 report some pictures of the survey carried out and of the target points.