results to come soon.

For the time being I left PSL:
- episensor removed (must find another convenient place)
- AOM back put in place and driven with 3.5 V
- put back the power supply to the mic on tripod
- PSL plexi side (South East)slided by 15 cm to get some freh air on the bench
- PMC_TRA beam is folded toward the calorimeter: 63.8 W at 19:23 LT
- PMC is locked, I 've removed the 50 ohm on the Ctrl Cmd of the rampauto
- perturbation channel is repaired within the PMC rampauto (a wire soldered)
Remark: we should put 90° rotating hose connectors on the water cooled beam dump to avoid mechanical stress on the pipes