% 11/06/18
% 180611_SlaveTelescope_BeamProfile_r.txt
% Config #[C180611_d1]
% "a" set to 48,5 mm (ext sides to ext side of mounts)
% that is a = 48,5 - 20,4 + 3 + 2 = 33,1 mm center-to-center
% -20,4 + 3 + 2 = 2*mount thickness + 2*1.5 (lens thick) +2*1 (mount bearing side thickness)
% !!! after telescope LB_L4/LB_L5/a = 0,12/-0.114/0,036 increased to  48.5 !!!
% LB_WP5 located at 1,44 m from Slave Measured waist of 17/12/04 (17 cm inside the Slave enclosure)
% LB_L4 telescope lens located at 365 + 535 + 380 = 1.28 m from LB_WP5
% d(LB_M5'-LB_L4) ~ 38.0 cm (to the lens center)
% LB_L5 telescope lens at z = - 0.485 m wrt to lens mount downstream

% Beam profile meas. in transmission of LB_M6
% !!! I've checked that the BeamScan orientation (h/v) is correct
% z		2*wh(13.5%) 2*wv(13.5%) in um
0.00	482	470
0.03	346	349
0.05	296	306
0.07	238	250	
0.09	247	238
0.11	350	346
0.13	470	446
0.15	573	554
0.17	653	679
0.19	791	763
0.24	1076	1059	
0.29	1354	1348
0.34	1615	1600
0.39	1926	1922
0.44	2173	2180

% Conclusion
% 180611_SlaveTelescope_BeamProfile_r.txt
% w0h = 131 um @ +0.552 m from LB_L5, M2 = 1.14
% w0v = 130 um @ +0.553 m from LB_L5, M2 = 1.13