Reports 1-1 of 1 Clear search Modify search
Detector Operation (Operations Report)
menzione - 23:00 Friday 15 June 2018 (41831) Print this report
Operator Report - Afternoon shift 15/06

13:00 ITF locked in LOW_NOISE_3 with Horizon 31 Mpc.
The planned Activity on ISC went on without majorĀ  problem from 13:00 to 16:50 UTC.
Commissioning Mode Stopped.
Calibration Mode Set.
From 16:57 to 17:27 I performed the planned Calibration "CALIBRATED_DF_SENSITIVITY".
Calibration Mode Stopped.
17:50 ITF unlocked
17:50 UTC I went at WE to switch off SWEB Step Motors.
18:00 UTC I went to DetLab to switch OFF SQZ particle counter inside acoustic enclosure. The DET particle counter also was very noisy. I switched OFF also that one. (Monday morning it can be swith ON again).
The effect is clearly visible in the Spectrograms (fig1) and (fig2) but not in the DMS plot (fig3).

ITF locking has been soon restored. At 18:58 UTC the Horizon reached 33 Mpc.

21:00 UTC ITF left locked in Autorelock Mode.

Suspensions
Under request of Ruggi, at 20:50 UTC, I changed the Gains of ADD UNLOCK from 0.1 to 0.2 for NE, WE, NI and WI F7 CoilDrivers via damp card.

DMS
14:45 UTC under request of Soldani I changed the thresholds for INF_NEB_CHILLER_TE_IN, INF_NEB_CHILLER_TE_OUT.
18:10 UTC ParticleCounterSQZ subflag muted till monday morning.

Images attached to this report
Comments to this report:
chiummo - 16:54 Saturday 16 June 2018 (41867) Print this report

The ITF lose lock yesterday night (see pic 1), and after some attempts got stuck by ITF_STATUS autorelock. I tried to restore the lock, but apparently the 7Hz is too high even for the simple LOCKED_ARMS status (see pic 2).

I leave the ITF in DOWN, to be checked later.

Images attached to this comment
carbognani - 14:11 Wednesday 11 July 2018 (42104) Print this report

In order to monitor the SDB1-SQZ viewport replacement activities the DET particle counter has been reactivated including data collection (Fig. 1).

Images attached to this comment
menzione - 17:30 Wednesday 11 July 2018 (42106) Print this report

At 15:00 UTC I added ENV_DETR..DUST_0P7UM channel in VPM -> EnvMoni.
Now it's monitored in DMS -> DET_Area.

Search Help
×

Warning

×